drawing number rev 1501 route 34 south farmingdale, nj 07727 title material fscm finish: all dim's in: inches (mm) 83330 this drawing and the contents herein are confidential and the sole property of dialight. reproduction of this drawing or construction of any parts within this drawing are forbidden without the written consent of dialight. 6.000 # .125 [152,4 # 3,18] .625 [15,88] max .210 [ 5,33 ] max .281 [ 7,14 ] ref .50 # .03 [12,7 # 0,76] klj 559-0103-003f red diff. gaasp 559-0202-003f 559-0203-003f 12.0 13 green diff. gap 559-0302-003f 5.0 8.0 559-0303-003f 12.0 13 yellow diff. gaasp/gap 8.0 559-1101-003f gaasp/gap 2.3 559-1201-003f 2* gaasp/gap 559-1301-003f 1.8 2* green diff. gap 1.8 559-2101-003f 10** red diff. gaasp/gap 559-2201-003f 10** green diff. gap 559-2301-003F 10** yellow diff. gaasp/gap 10.0 559-2501-003f 1.9 gaasp/gap 7.0 scale: 4:1 tolerances: unless otherwise specified fractions: # 1/64 decimals (.xx): # .02 decimals (.xxx): # .015 decimals (.xxxx): # .0005 angles: # 3 $ b led panel mount indicator rohs compliant c-17617 sheet 1 of 1 family table: rev ecn no revisions drn ckd app date a new release rp mes 7-7-08 b added wire insulation o.d., stripped length dimension and included "type c mil-w-168780" in note 2. ajf klj no 7-24-09 dialight part number forward voltage (v) typ forward current (ma) typ led epoxy color led chip peak wavelength (nm) luminous intensity (mcd) typ 559-0102-003f 5.0 10 red diff. gaasp 635 8.0 12.0 13 635 8.0 5.0 12 green diff. gap 565 8.0 565 8.0 10 yellow diff. gaasp/gap 583 583 1.8 2* red diff. 635 1.9 yellow diff. 583 1.8 565 2.2 650 6.3 2.1 563 10.0 2.0 585 10** orange diff. 600 notes: 1. * requires external resistor. ** requires external resistor, max forward d.c. current 7ma. 2. lead wires: #24 pvc 7/32 pre-bonded type c mil-w-168780. 3. recommended mounting hole: .249-.252 on panels .031-.062 thick. 4. led lead dimensions shown are measured at housing exit. 5. pin numbers for reference only, designation non-existent on part. 6. dialight part numbers: 559-xx0x-003f. 7. this assembly contains electrostatic discharge sensitive devices (esds). maintain all precautionary measures during assembly, handling, and storage in accordance with ipc-a-610. rohs compliant 559-xx0x-003f part numbers with the "f" suffix ending are rohs compliant. packaging is marked with "rohs compliant" label or equivalent markings. parts can be wave soldered, dip soldered or hand soldered using typical lead-free soldering process with max 260c temp. for 5 sec. housing (valox) 559-xxxx dialco red wire anode lead (+) cathode lead (-) 1 2 5mm led black wire .058 # .005 [1,47 # 0,127] typ. attention: observe precautions for handling electrostatic sensitive devices led schematic pin 1 cathode pin 2
|
